Order data for Industrial Wire Screens

To order industrial wire screens the following information is required:

1. The quantity required and all dimensions of the pieces, including the tolerances.
2. The aperture width w (if requested with test report) and the wire diameter d.
3. The wire material (alloy, surface finish, preferably analog international or national standards).
4. Required type of screen acc. to ISO 4783-3: 1989, Table 3, if other than type A (type A = DOUBLE CRIMP SCREEN).
5. Flow direction of sieve material
6. Type of certification, if any.
7. Any other requirements not mentioned.
8. Drawing with dimensions and, if different, tolerances.
9. FL - overall length of hook strip
10. Spi/Spa - measurement between the hook strips (Spi-inside hook strips, Spa- outside hookstrips)

Please use our questionnaire form for screen sections (see tab above).

To order screen frames the following information is required:

1. The quantity required and all dimensions of the frame.
2. The aperture width w (if requested with test report) and the wire diameter d.
3. The wire material (alloy, surface finish, preferably analog international or national standards).
4. Required type of screen acc. to ISO 4783-3: 1989, Table 3, if other than type A (type A = DOUBLE CRIMP SCREEN).
5. Flow direction of sieve material (for rectangular frames)
6. Type of certification, if any.
7. Any other requirements not mentioned.
8. Drawing with dimensions and, if different, tolerances.

Please use our questionnaire form for round-/rectangular screen frames (see tab above).