Loading...
HAVER & BOECKER
  • HAVER STRUCTURA Design mesh
    Authentic – elegant – versatile

Wire mesh and hybrid mesh for the designers amongst you

Attention to detail and the desire to stand out from the crowd are prompting more and more buyers to choose exclusive furniture, lamps and other design products. The joy of stylish and high-quality vehicle interiors is also immediately apparent to car lovers. This joy is a great challenge for the interior designers, who are always on the lookout for new visual impulses as well as haptically appealing and valuable materials.


 

 

You'll see and feel the ease of differentiation with authentic materials.
Statement from the design mesh video

Design mesh offers exclusive design possibilities

HAVER STRUCTURA for different applications

Spectacles design using HAVER STRUCTURA design mesh Spectacles design using HAVER STRUCTURA design mesh Spectacles design using HAVER STRUCTURA design mesh
Object and product design: ©MYKITA GmbH | MYKITA MYLON APHEX
Trim in a vehicle with design mesh made of stainless steel and black PET Trim in a vehicle with design mesh made of stainless steel and black PET Trim in a vehicle with design mesh made of stainless steel and black PET
Automotive interior: design of decorative elements
Wire mesh for the attractive and high-quality design of lamps Wire mesh for the attractive and high-quality design of lamps Wire mesh for the attractive and high-quality design of lamps
Other applications: protective covering of furniture and lamps
Facade cladding is one of the possible applications for use of architectural wire mesh Facade cladding is one of the possible applications for use of architectural wire mesh Facade cladding is one of the possible applications for use of architectural wire mesh
Architecture: creative building design

We present diverse facets

A range with different patterns and materials

We weave the design mesh entirely from stainless steel wires or from a combination of metal and coloured PET monofilaments.
Different weave types allow for a wide variety of surface structures and patterns that make an impression:

  • Open-transparent or closed-tight.
  • Varying appearance depending on the angle of view.
  • The homogeneous surface is not only visually but also haptically appealing.

HAVER STRUCTURA 1st Collection

HAVER STRUCTURA FLAIR

Inimitable in look and feel

For the expansion of our product range, we take up the suggestions, ideas and desires of interior designers. This is how the incomparable STRUCTURA FLAIR collection was developed. Get a sample folder now and let yourself be inspired.

Design mesh sample folder Design mesh sample folder Design mesh sample folder
Take the design mesh into your own hands!

HAVER STRUCTURA FLAIR Collection

Colourful accents in a vehicle interior

And the hearts of drivers beat faster

Our design mesh offers impressive surfaces and is thus ideally suited for the design of decorative elements. These lend elegance to the vehicle interior and are light and sound permeable at the same time. Depending on the mesh pattern, you can achieve a pleasantly calm or even ambitiously sporty atmosphere in this way.

The combination of stainless steel wires with black or grey accents underlines the classic elegance, while natural tones reflect the calm atmosphere of nature.

Feel-good factor officially confirmed

The results of testing by the certified testing institute Imat-uve now demonstrate the low organic emission values of the design mesh and therefore its harmlessness in terms of effects on the health of passengers. Above all, the results of the fogging behavior and the thermodesorption according to VDA 278 are significantly below the general limits of the automotive industry.

Fogging behavior describes the condensation of volatile material substances that could result in contamination of the air in the vehicle interior or even fogging of the windshield. In addition to the emission tests, the burning behavior and abrasion resistance of the metal wire and hybrid mesh were also investigated. The wire mesh blanks also achieved positive test results with regard to these parameters - irrespective of the subsequent material composite.

Tested design mesh in vehicle interior Tested design mesh in vehicle interior Tested design mesh in vehicle interior
The look, feel and air quality ensure a good driving experience.

Enquired

As product manager Florian Alsmann is responsible for the area of HAVER STRUCTURA design mesh. In an interview he reports on this daily work and reveals what designers can look forward to in future.

Florian Alsmann: product manager design mesh
[...] thanks to our weaving technique, there is always the possibility to adapt the patterns to designers‘ specifications.
Florian Alsmann, Product Manager design mesh
  • pdf
    Characteristic features of our design mesh: Interview with Florian Alsmann File Size: 397 KB
Technical data sheets Technical data sheets Technical data sheets

Technical data sheets

Descriptions, dimensions and mechanical properties

We would not like to deprive you of the article number, material, weight and mesh thickness, but also the yield strength, maximum load and elongation of the individual design mesh types. We will be happy to provide you with the technical data sheets of our 1st Collection and the STRUCTURA FLAIR Collection for viewing and downloading.

Optimisation measures

Complete fabricated part, cut to size or roll material?

We will gladly accept your wishes and also optimise the design mesh according to your further processing steps and processes.

What you may not have known yet:

  1. Metal or hybrid mesh (monofilament) becomes back-injected and bonded by fleece lamination. The thermoforming capability and the possibility of translucent backlighting are retained.
  2. Thermal treatment improves the malleability of the mesh.
Design mesh cut with white fleece lamination Design mesh cut with white fleece lamination Design mesh cut with white fleece lamination
Design mesh cut with fleece lamination.
Do you have any questions?
I'm looking forward to helping you:
Florian Alsmann
Product Manager Design Mesh
HAVER & BOECKER OHG
Wire Weaving Division
Ennigerloher Str. 64
59302 Oelde, Germany